PCE-DC 9EV, EVSE power supply PCE-DC 9EV

EVSE power supply PCE-DC 9EV

Current Tensile with a measuring range of 0... 1000 A AC / DC / frequency measurement small and compact construction / on-line current measurement / immediately ready for use / 25 mm wide current Tensile opening / optional with ISO certification The current Tensile is a measuring instrument for the precise determination of electrical currents. With a current range of 25 mm and a measuring range of 0... 1000 A AC / DC, the current range covers most of the measurement tasks. The current measurement is inductive in the current tongs. This means that the test pieces to be measured do not have to be switched off before. This allows the current to be measured in the current operation. The measured value is shown numerically as well as graphically using a bar diagram. The compact design of the current tongs also allows for uncomplicated storage of the measuring instrument in working pockets. Electromobility is playing a growing role. It is therefore important to know the current flow in the lines. With the current trench, the wall box of an electric vehicle can be monitored on the primary and secondary sides. In addition, the power supply can be used in workshops to check electric vehicles. In this way, the start-up current of the electric motors or the on-board current can be tested with the current supply. In addition to the normal measurement mode, the current line can also measure the on-turn current. A switch-on current measurement with the current line is particularly necessary when driving engines, such as ventilation systems, to exclude possible sources of error. = = References = = = = External links = = * Official website This function can be used to determine currents in the low-frequency range. In this process, currents up to a frequency of 1 kHz are measured from the current range. The current can be used for the current measurement of the low-voltage, for example. The low pass filter refers to a frequency up to 1 kHz Other specifications All the details apply to an environment between 18... 28 ° C, with a numeric view, 30 Hz, with a bargraph operating conditions -10... 50 ° C, < 85% Rf., non-condensing storage conditions -20... + 60 ° C, < 75% Rf., non-condensing maximum height 2000 - 1 mm (2)