PCE-HVAC 6, current tongs / tongs multimeter PCE-HVAC 6

Pin / Pin Multimeter PCE-HVAC 6

Tin multimeter PCE- HVAC 6- 1000 A AC / DC / non-contact voltage detection / voltage measurement up to 600 V temperature measurement via thermocouple / robust rubber housing The Tin multimeter PCE- HVAC 6 was specially developed for the craftsmen in the area of heating, ventilation and air conditioning. This HVAC Tin Multimeter is excellent for many test and maintenance work in this area. This trench multimeter combines many measuring instruments in one. This is how it is possible to measure currents of up to 1000 A in the same and alternating current range over the pliers with this pincers. In addition, voltages up to 600 V AC / DC can be determined exactly. For quick and easy testing of electric conductors, the Zangenmultimeter is equipped with a non-contact voltage detection. The PCE-HVAC can also measure 6 resistors and capacitors. The diode test and the pass test complete the series of electrical measuring functions of the zangenmultimeter. As a special feature, the PCE-HVAC 6 Pin Multimeter has 2 measurement inputs for type K thermocouples. With the help of these thermocouples, for example, the pre and return temperature can be measured on heating systems. The Zangenmultimeter was developed for the daily life of a service force. The robust plastic housing can easily withstand impact. A transverse gumming on the case of the PCE-HVAC 6 helps to ensure that the pincers are in the hand, even if the technician is wearing gloves. The display is equipped with a LED backlight that facilitates reading in dark environments. As a further highlight, the Zangenmultimeter at the Zangenspitze has a measuring point lighting. - current measurement up to 1000 A - coverage of the measuring book voltage measurement up to 600 V - temperature measurement over 2 thermocouple display & measurement point illumination - contact-free voltage detection of the current measurement DC A measurement range accuracy (from Mw.) 500 µA 0.01 µA ± (from 1% + 6 Digit) 5000 µA ± (from 1% + 6 Digit) 50 A ± (from 2.5% to 5 Digit) 1000 A ± (from 1% to 30% Digit) The accuracy of AC A measurements refers to the range of 5% to 100% of the measurement range of resistance measurement measurement range of accuracy (by Mw.) 500? 0.01 ± (1% + 9 Digit) 5 k? 0.0001 ± (1% + 5 Digit) 50 k? 0.001 ± (1% + 5 Digit) 500 k? 0,01 ± (1% + 5 Digit) 5 M? 0,0001 ± (3% + 10 Digit) 50 M? 0,001 ± (3.5% + 10 Digit) Voltage measurement DC V measuring range accuracy (from Mw.) 500 mV 0.01 mV ± (0.1% + 8 Digit) 5 V 0.0001 V ± (0.1% + 4 Digit) 50% Digit + 0,001 ± V ± (0.1% + 10 Digit) Voltage measurement 500 V ± (0.1% Digit) 50% Digit + 30 V ± (1%) 100% Digit + 30 V ± V + 30% Digit + 50% (0.5%) The accuracy of AC V measurements refers to the range of 5% to 100% of the measurement range of capacity measurement range of accuracy (from Mw.) 500 nF 0.01 ± (from 3.5% to 40 Digit) 5000 nF 0.1 ± (from 3.5% to 10 Digit) 50 µF 0.001 ± (from 3.5% to 10 Digit) 500 ± 0.01 ± (from 3% to 10% Digit). 48 mm display Two-line 50,000 Digit pass test 50 Ohm / < 50 mA Diodentest 0.3 mA / 2,8 V DC battery display battery symbol if battery level low measurement range OL when measuring range exceeded Samplerate 2 Hz peak detection > 1 ms thermocouple type K fuse 500 mA ceramic Flink AC bandwidth (AC A / AC V) 50 Hz... 400 Hz AC measurement True RMS operating conditions 5 ° C... 40 ° C / max. 80% r.F. at 31 ° C storage conditions -20 ° C... 60 ° C / max. 80% r.F. Power supply 9 V block battery Automatic shutdown after about 30 minutes of dimensions (B x H x T) 230 x 76 x 40 mm weight 315 g safety IEC 1010-1 (2001): EN 61010 -1 (2001) CAT III 600 V CAT II 1000 V pollution level 2 1 x power supply PCE-HVAC 61 x transport pocket 2 x test lines 1 x battery 9 V block battery