AKE, control of AKE for fully automatic cellar dehumidification

Control AKE for fully automatic cellar dehumidification

Fully automatic, intelligent cellar dehumidification control for the highest demands. Permanent comparison of the absolute humidity in the indoor and outdoor areas: Connected fans air independently when the absolute humidity in the room is greater than the outside. No maintenance and manual control required: install 1x and the system works automatically. Operation of fans up to a total (supply and exhaust air fan) 200 W and 1 A. For the use of fans > 200 W and 1A as well as rotary current fans, a power switch between the control and the fan must be installed. Accessible product, as automatic on / off switch without additional switch. Control monitors the room humidity via integrated humidity temperature sensors. Frost protection function: Disabling the system at internal temperatures below 5 ° C. Dry protection function: Disabling the system at a relative humidity less than 30%. Additional manual operation for 20 min. can be switched on and off via the button on the control. No additional installation required from switch to device. Additional manual continuous operation with switch possible. Status and function display by LEDs. 2 buttons: Reference value setting and activating manual ventilation. Compact dimensions: control 120 x 94 x 50 mm, external sensor 45 x 30 x 23 mm. Scope of delivery: control, sensors, 15 m sensor connection cable. Case made of impact-resistant plastic. IP protection: control IP40 / external sensor IP54. Frost protection: To avoid cooling the room, the AKE has a frost protection function. The connected fan (s) automatically switches off at internal temperatures of less than 5 ° C. Dry protection: To avoid drying out the room, the AKE has a dry protection function. The connected fan (s) automatically switches off at a relative room humidity of less than 30%. Suitable for continuous operation. Assembly information: Easy installation: wall assembly. Electrical connection: optional on or off-the-job: 1 A, protection: IP 40, power supply: 3 / 1.5 mm2, voltage at the output: 2 / 230 V, installation location: wall, installation type: plaster, material: plastic, plastic data: polystyrene, PVC-free, colour: white, weight: 0.49 kg, packaging with a maximum surface temperature: 62 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60 ° C: 60 ° C, width: 60 ° C, width: 60 ° C, width: 60