LIA 0911HWCF M, System S Compact heat pump LIA 0911HWCF M

System S Compact heat pump LIA 0911HWCF M

Heat pump system for heating and cooling with inverter control and integrated heat pump manager WPM Touch with touch display. The hydraulic unit (inside) and the external unit are connected by a refrigerant line (special accessories). In the case of line lengths above 15 m, additional refrigerants must be refilled when put into service. The maximum power length is 30m. The external unit with power-controlled compressor (inverter) adapts the heating power to the heat requirements of the building or the hot water requirement and can be mounted close to the wall. Sound-optimized by electronically controlled fans. The optional cooling can be done via blower convectors or surface heating systems. For the silent cooling via surface heating systems (e.g. floor heating) an intelligent room temperature controller smart-RTC with moisture measurement (special accessories) is required to determine the dew point. The following components are mounted space-saving and ready-to-use wired: built-in pipe heating (2 / 4 / 6 kW) can be used for hot water heating up to 60 ° C and as a reserve for heating water storage 200 l of electronically controlled heating circulation pump (note free pressure) safety valve including. Extension vessel Flexible expansion possibilities for the combination of mixed and unmixed heating circuits, as well as bivalent or bivalent regenerative operation. A condensate heating is integrated as standard. The electrical connection between the control to be mounted in the building and the external unit is made via a, not included, shielded 2-wheel data cable (e.g. LiYY 2x0.6 mm ² or J-Y (ST) Y.. LG2x2x0.8 mm2). Pre and return sensors, dirt vessels and flow sensors are integrated.