LIA 1316HXCF, reversible air / water heat pump in split design.

Reversible air / water heat pump in split design.

Heat pump system for heating and cooling with inverter control and integrated heat pump manager WPM Touch with touch display. The hydraulic unit (inside) and the external unit are connected by a refrigerant line (special accessories). In the case of line lengths above 15 m, additional refrigerants must be refilled when put into service. The maximum power length is 30m. The external unit with power-controlled compressor (inverter) adapts the heating power to the heat requirements of the building or the hot water requirement and can be mounted close to the wall. Sound-optimized by electronically controlled fans. The optional cooling can be done via blower convectors or surface heating systems. For the silent cooling via surface heating systems (e.g. floor heating) an intelligent room temperature controller smart-RTC with moisture measurement (special accessories) is required to determine the dew point. High-efficiency heating pump (note free pressure) Built-in pipe heating (2 / 4 / 6 kW) can be used for hot water heating up to 60 ° C and as a reserve for heating use of load-variable tariffs Flexible expansion options for the combination of mixed and unmixed heating circuits, as well as bivalent or bivalent regenerative operation. A condensate heating is integrated as standard. The electrical connection between the control to be mounted in the building and the external unit is made via a, not included, shielded 2-wheel data cable (e.g. LiYY 2x0.6 mm ² or J-Y (ST) Y.. LG2x2x0.8 mm2). Pre and return sensors, dirt vessels and flow sensors are integrated. Heat pump system for heating and cooling with inverter control and integrated heat pump manager WPM Econ5Plus with standard display. The hydraulic unit (inside) and the external unit are connected by a refrigerant line (special accessories). The external unit with power-controlled compressor (inverter) adapts the heating power to the heat requirements of the building and can be mounted close to the wall. Sound-optimized by electronically controlled fans. With a flexible control range, the heating and hot water performance can be adapted to the actual heat requirements. The optional cooling can be done via blower convectors or surface heating systems. For the silent cooling via surface heating systems (e.g. floor heating) an intelligent room temperature controller smart-RTC with moisture measurement (special accessories) is required to determine the dew point. The following components are mounted space-saving and ready-to-use wired: switchable pipe heating (2 / 4 / 6 kW) for heating support hot water storage 300 l with 3.2 m2 pipe heat exchanger and flanking heating 1.5 kW for thermal disinfection Electrically controlled pump, 100l buffer storage and overflow valve to ensure the required heating water flow free pressure heating circuit circulation pump 38800 Pa at a heating water flow rate of 1.6 m3 / h. Energy efficiency index EEI? 0.20. Safety valve including Connection for expansion vessel Flexible expansion possibilities for bivalent or bivalent regenerative operation. Condensatwannen heating at LAW 14 integrated as standard. Available for LAW 9IMR as an accessory (KWH 60). The electrical connection between the control to be mounted in the building and the external unit is made via a 2-wheel data cable not included (e.g. LiYY 2x0.6 mm2 or J-Y (ST) Y.. LG2x2x0.8mm2). Dust collector and flow switch integrated. integrated forward and return sensors; External sensor (standard NTC-2) and pressure manometer in delivery.