VB18060, bath infrared heating 1800x600x26mm 860W w

Bath infrared heating 1800x600x26mm 860W w

As infrared heating, the bathroom heater is used as a wall heating element for heating closed rooms in the living and working environment. The VB series of wall infrared heating is suitable for cleaning on the wall. The heating element can only be mounted in high format. The protection is IPX4.The effective, yet decorative, vitramo-bath-heating body heats up radiation-oriented walls that surround the room and differentiates the floor so that they have little temperature differences among themselves. Only in contact with the warm surfaces is the room air heated evenly and almost free of flow. This means that the conditions of living comfort are achieved without unnecessary energy use. The wall heating element of the VB series consists of galvanized steel sheet, 1,0 mm thick, the front is powder-coated, signalwhite similar to RAL 9003. The elements on the back are closed with a blank lid. Up to three VZ-B-series towel holders can be purchased as accessories and easily attached to the heating element. The heating element has two heating zones. The lower reaches a surface temperature of not more than 70 ° C, the upper one of not more than 100 ° C at an ambient temperature of 20 ° C, and the lower part of the towel holder is mounted. For the power supply, the heating elements are equipped with a connection cable, colour white, 1.2 m long without a power connector. This product is a stationary single-space electric heater with a nominal heat output of more than 250 W to meet the mandatory ecodesign requirements of Commission Regulation (EU) 2024 / 1103, it must be supplemented by a controller that meets at least the following regulatory functions: TW (0 / 2 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / 0 / For further information and a declaration of the codes of the control functions, see the product data sheet. This product may only be installed by an electric expert and must be put into operation in accordance with the installation and assembly instructions. Only then will the mandatory ecodesign requirements of Regulation (EU) 2024 / 1103 be met. The electric power is responsible for the compliant commissioning. Vitramo is the leading manufacturer and produces wall and ceiling infrared heating exclusively in Germany.