ERK 200, diagonal fan ERK 200 two-stage, DN200

Diagonal fan ERK 200 two-stage, DN200

Tube fan, made of polypropylene. Pressure and suction-side connectors according to the diameter of the winding-up tube. For direct installation between pipelines. Convenient revision and maintenance by simply opening the clamping bar and removing the fan. Diagonal impactor with downstream stator (except ERK 100, axial impactor). Motor: Asynchronous motor according to model 1.2 or 3. Protection type IP 44. Robust engine with ball bearing, maintenance-free. Speed control possible by phase cutting or transformer (except version T and ST). The technique of the phase-cutting allows a physical noise to occur. Use 5-step transformers in rooms with a low-noise fan requirement. Thermal overload protection as standard. Electric connection: external terminal box with cable inlet. Safety instructions: In the case of free suction or inflation, use only if the contact protection is guaranteed in accordance with DIN EN ISO 13857. For this purpose, SGR can be supplied with protection gitter.Article: ERK 200, version: standard design, conveyor volume: 720 m3 / h / 820 m3 / h / 910 m3 / h, speed: 1800 1 / min / 2000 1 / min / 2700 1 / min, wheel type: diagonal, speed control: yes, reversability: no, voltage: 230 V, power frequency: 50 Hz, nominal power: 55 W / 65 W / 85 W, power: 65 W, IMax: 0.24 A / 27 mm, maximum level: 0,34 mm, maximum level: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum height: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm, maximum: 0,34 mm. Speed: 2700 1 / min