AirBlue SBA150 o.

Additionally available packaging sizes: 1

The AirBlue SBA swimming pool dehumidifiers are trushers, which are mounted directly in the swimming pool. 5 models with maximum dehumidification performance from 49 to 190 l / day are available (at 30 ° C / 80% f.). The equipment may only be used with chlorine. Due to their very simple installation, the operator is largely spared dirt and further nuisance during installation, the installation costs are low. In addition to power supply and condensation, no other connections are necessary. The shape-beautiful and resistant housing in pure white (RAL 9010) is due to its low building depth of 260 and 310 mm inconspicuous and reserved into the architecture of the swimming pool and does not need much space. The particularly efficient R410A is used as a refrigerant. The heat energy released via the heat pump circuit is fully retransmitted to the room, which contributes to a significant saving of heating energy. For further heating a PWW- heating register is available, which can be connected to the heating network. This allows the air in the swimming pool to be heated quickly if necessary. The best possible economic operation is achieved through internal control electronics. All control functions are very easy to set for the user. In the cooling cycle of the AirBlue SBA swimming pool air dehumidifier, only proven technology of renowned brand manufacturers is used, all components are housed in the compact housing. Various options such as pump hot water heating registers, electronic and mechanical hygrostate, stand feet, etc., offer the user additional comfort according to the requirements and application purpose. Efficient air dehumidification, energy efficient through heat pump principle, low-noise fan, simple assembly and operation, corrosion-resistant coating, fully electronic dixell controller. Dehumidification performance 30 ° C / 80% r. F. is 155.0 l / d, dehumidification performance 30 ° C / 60% r. F. is 113,1 l / d, dehumidification performance 27 ° C / 60% r. F. is 96.6 l / d, dehumidification performance 20 ° C / 60% r. F. is 71.5 l / d, maximum power consumption 2.3 kW, power consumption 30 ° C / 80% r. F. is 1,9 kW, nominal current consumption 10,5 A, power level 59 dB (A), power pump / hot water register at 30 ° C and 80 / 70 ° C water temperature, compressor out is 11,5 kW (optional), power electric heating register is 6,0 kW (optional), sound power level 59 dB (A), power pressure level 52 dB (A), power supply 230 / 1 / 50 V / ~ / Hz, dimensions (H x B x) 836 x 1310 x 310 mm, weight 99 kg, air flow rate is to be determined. The requirements of the VDI 0100-702 for the arrangement of the device in the swimming pool are mandatory. In principle, the devices should be installed in zone 2 according to VDE 0100- 702, i.e. at a distance > 2 m from the pelvic edge. In small swimming halls, which do not allow an installation in zone 2 from their dimensions, the device can also be mounted closer to the pool edge. However, a distance > 1.25 m from the pelvic edge and > 0.3 m from the floor should be observed. The distance to showers and sinks should also be > 1.25 m.